Exterior 450 Topcoat a clear-drying finish suitable for vertical exterior surfaces, such as fences, patio furniture, garage doors, entrance doors and interior windows.
It is not recommended as a deck finish. Exterior 450 is fortified with UV absorbers to stabilize the finish and built-in mildewcide to retard mold and mildew growth. It performs well as a clear coat or as an optional topcoat over General Finishes Milk Paint.
Apply with brush or via HVLP sprayer
Dries to a clear finish in 1 to 2 hours depending on temperature and humidity.
Do not apply in temperatures below 60° F.
For outdoor use, make sure that the stain underneath is also rated for outdoor exposure.
It can be used over most water and solvent based stains.
Test a hidden area for compatibility to be sure.
Sand lightly with 320 or higher grit paper between coats.
Cleans up with soap and water.
Exterior 450 meets the environmental GREEN guidelines set forth for Architectural, Cabinets and Furniture (EPA 40 CFR Parts 9, 59 & 63), California Wood Coatings (SCAQMD Rule 1136), Kitchen Cabinet Makers Association (ESP - Environmental Stewardship Program), and the U.S. Green Building Council (USGBC Leadership in Energy and Environmental Design).
WARNING: This product can expose you to chemicals including Nickel which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.
WARNING: This product can expose you to chemicals including Nickel which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.
Login and Registration Form
Creating an account has many benefits: check out faster, keep more than one address, track orders and more.