Snappy 7 x 50 mm Confirmat Stepped Drill Bit

Make-It-Snappy® 7 x 50 mm Confirmat Stepped Drill Bit

Designed to predrill for Confirmat Screws.

FEATURES:

Depth stop collar sets pre-drilled hole to fit the contour of the Confirmat screws to make tight joints.
Changeable pilot drill for long life.
Ball Detent Hex Drive for maximum torque when drilling (No slippage)

Made in USA.

More Information
Plug Outside Diameter	10 mm
Drill Diameter	5 mm
BRAND	Make It Snappy
Countersink Type	Stepped Specialty
Point Type	Brad
Shank Type	HEX, ball detent d
QUANTITY	(1) Each
SKU	MS-7050
Prop 65	WARNING: While working in a hazardous areas where you can be exposed to flying objects, fragments, and particles, primary protective devices such as safety glasses or goggles with side shields must be worn. Secondary protective devices such as a face shield is required in conjunction with primary protective devices during severe exposure to impact hazards. WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.

Reviews

Prop

Prop 65 Warning Triangle WARNING: While working in a hazardous areas where you can be exposed to flying objects, fragments, and particles, primary protective devices such as safety glasses or goggles with side shields must be worn. Secondary protective devices such as a face shield is required in conjunction with primary protective devices during severe exposure to impact hazards.

WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.