Snappy Trim-Head Countersink Drill Bit - 1/8 in. Pilot
- Buy 2 for $8.97 each and save 5%
- Buy 5 for $8.68 each and save 8%
- Buy 10 for $8.50 each and save 10%
Snappy Trim-Head Countersink Drill Bit - 1/8 in. Pilot
Make-It-Snappy® Trim-Head Countersink Drill Bit
Finally, A Countersink Designed for Trim Head Screws
Trim head screws are great for installing trim moldings in softwoods, but generally require pre-drilling in hardwoods to avoid splitting, or worse yet, stripping of the recess. Standard countersinks either have too large a countersink or too small a pilot bit. The result is an oversized head hole that requires excessive filling, or a pilot hole that isn't big enough to clear the screw threads.
Our trim-head countersink drills a 1/8 inch clearance hole and has a 1/4 in. diameter countersink that fits most trim head screws perfectly.
You will need to eye-ball the depth. On countersinks this small, the use of a stop collar prevents wood chips from clearing, leading to heat build up, which can prematurely dull the edge on the countersink.
Made in USA.
| Product Group | Drill Bits |
|---|---|
| Plug Outside Diameter | 1/4" |
| Drill Diameter | 1/8 in. |
| BRAND | Make It Snappy |
| Countersink Type | Trim-Head |
| Point Type | Standard |
| Shank Type | HEX, ball detent d |
| QUANTITY | (1) Each |
| SKU | MS-7010 |
| Prop 65 |
|
WARNING: While working in a hazardous areas where you can be exposed to flying objects, fragments, and particles, primary protective devices such as safety glasses or goggles with side shields must be worn. Secondary protective devices such as a face shield is required in conjunction with primary protective devices during severe exposure to impact hazards.
WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.
Login and Registration Form