Snappy 5 x 40 mm Confirmat Stepped Drill Bit
Snappy 5 x 40 mm Confirmat Stepped Drill Bit
Make-It-Snappy® 5 x 40 mm Confirmat Stepped Drill Bit
Designed to predrill for Confirmat Screws.
FEATURES:
- Depth stop collar sets pre-drilled hole to fit the contour of the Confirmat screws to make tight joints.
- Changeable pilot drill for long life.
- Ball Detent Hex Drive for maximum torque when drilling (No slippage)
Made in USA.
| Plug Outside Diameter | 7.62 mm |
|---|---|
| Drill Diameter | 3.5 mm |
| BRAND | Make It Snappy |
| Countersink Type | Stepped Specialty |
| Point Type | Brad |
| Shank Type | HEX, ball detent d |
| QUANTITY | (1) Each |
| SKU | MS-5040 |
| Prop 65 |
|
WARNING: While working in a hazardous areas where you can be exposed to flying objects, fragments, and particles, primary protective devices such as safety glasses or goggles with side shields must be worn. Secondary protective devices such as a face shield is required in conjunction with primary protective devices during severe exposure to impact hazards.
WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.
Login and Registration Form