Snappy 3.5 mm Replacement Pilot Bit for 5 x 40 mm Stepped Countersink
Snappy 3.5 mm Replacement Pilot Bit for 5 x 40 mm Stepped Countersink
The problem with one-piece bits that they are easily broken if dropped on a hard floor. This Connecting Screw Step Drill is designed so that you can easily replace the brad point pilot drill when it is damaged or worn out. Shank is 1/4 in. hex, and fits most quick change chucks as a bonus!
For best results and longest life, clear the chips often when drilling.
Made in USA.
| BRAND | Make It Snappy |
|---|---|
| Shank Type | HEX, ball detent d |
| Drill Diameter | 3.5 mm |
| SKU | MS-5040R |
| Prop 65 |
|
WARNING: While working in a hazardous areas where you can be exposed to flying objects, fragments, and particles, primary protective devices such as safety glasses or goggles with side shields must be worn. Secondary protective devices such as a face shield is required in conjunction with primary protective devices during severe exposure to impact hazards.
WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.
Login and Registration Form