Snappy Tapered Drill Countersink Set
Snappy Tapered Drill Countersink Set
Make-It-Snappy® Tapered Drill Countersink Set
This set of countersinks is designed especially for use with tapered wood screws. Drill the proper size hole and sink the head all in one operation. For best results, adjust the drilling depth by adjusting the length of the drill bit using the supplied Allen wrench.
Includes:
- (1) - 9/64 in. pilot bit with 3/8 in., 82° countersink
- (1) - 11/64 in. pilot bit with 3/8 in., 82° countersink
- (1) - 13/64 in. pilot bit with 3/8 in., 82° countersink.
Screw size / Countersink pilot hole pairings:
- #6 screw thread size - 9/64 in. tapered bit
- #8 screw thread size - 11/64 in. tapered bit
- #10 screw thread size - 13/64 in. tapered bit
All fit into the Make-It-Snappy Quik Change Chuck™ for fast bit changes.
Made in USA
| Plug Outside Diameter | Assorted |
|---|---|
| Drill Diameter | Assorted |
| BRAND | Make It Snappy |
| Countersink Type | with Tapered Drill |
| Point Type | Tapered |
| Shank Type | HEX, ball detent d |
| QUANTITY | Package / Set |
| SKU | MS-4430 |
| Prop 65 |
|
WARNING: While working in a hazardous areas where you can be exposed to flying objects, fragments, and particles, primary protective devices such as safety glasses or goggles with side shields must be worn. Secondary protective devices such as a face shield is required in conjunction with primary protective devices during severe exposure to impact hazards.
WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.
Login and Registration Form