Snappy Quik Change Chuck
Snappy Quik Change Chuck
Make-It-Snappy® Quik Change Chuck™
The Quik Change Chuck is a snap to use. It lets you snap in hex shank driver bits and drill bits without pulling back on the collar, then remove them by simply retracting the collar and pulling out the bit!
Chuck shank is 1 in. long for use in all 3/8 in. capacity chucks.
Made in USA.
| BRAND | Make It Snappy |
|---|---|
| QUANTITY | (1) Each |
| SKU | MS-0011 |
| Prop 65 |
|
WARNING: While working in a hazardous areas where you can be exposed to flying objects, fragments, and particles, primary protective devices such as safety glasses or goggles with side shields must be worn. Secondary protective devices such as a face shield is required in conjunction with primary protective devices during severe exposure to impact hazards.
WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.
Login and Registration Form