Snappy Countersink Drill Bit - 7/64 in. x 3/8 in. - Festool Centrotec Compatible
Snappy Countersink Drill Bit - 7/64 in. x 3/8 in. - Festool Centrotec Compatible
Make-it-Snappy Countersink Drill Bit - Festool CentroTec® Compatible
- Fully compatible, milled shanks to fit the Centrotec chucks
- Drill Diameter: 7/64 in.
- Plug Outside Diameter: 3/8 in.
Made in the USA.
CentroTec® is a Festool registered trade name.
| Plug Outside Diameter | 3/8" |
|---|---|
| Drill Diameter | 7/64 in. |
| BRAND | Make It Snappy |
| Countersink Type | Standard |
| Shank Type | Centrotec |
| QUANTITY | (1) Each |
| SKU | MS-93007 |
| Prop 65 |
|
WARNING: While working in a hazardous areas where you can be exposed to flying objects, fragments, and particles, primary protective devices such as safety glasses or goggles with side shields must be worn. Secondary protective devices such as a face shield is required in conjunction with primary protective devices during severe exposure to impact hazards.
WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.
Login and Registration Form