Snappy 5/8 in. x Tool Steel Countersink
Snappy 5/8 in. x Tool Steel Countersink
Make It Snappy®Tool Steel Countersink
When you need to countersink an existing hole, this is the tool to use. Its 5/8 in. diameter and 82 degree angle suits modern screw design perfectly. The single flute design minimizes chatter and the potential for oval holes.
Made in the USA
| Plug Outside Diameter | 5/8" |
|---|---|
| Drill Diameter | NA |
| BRAND | Make It Snappy |
| Countersink Type | Existing Hole |
| Point Type | Standard |
| Shank Type | HEX, ball detent d |
| QUANTITY | (1) Each |
| SKU | MS-3099 |
| SPECS: | SPECS:
|
| Prop 65 |
|
WARNING: While working in a hazardous areas where you can be exposed to flying objects, fragments, and particles, primary protective devices such as safety glasses or goggles with side shields must be worn. Secondary protective devices such as a face shield is required in conjunction with primary protective devices during severe exposure to impact hazards.
WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.
Login and Registration Form