Snappy 9/64 in. Self-Centering Hinge Bit
Drill Bit Size Recommendations 9/64 is for hardwood using a #10 screw
Snappy 9/64 in. Self-Centering Hinge Bit
Make It Snappy Self-Centering Bit Set
Have you ever drilled hinge-screw pilot holes, and then discovered that they were off-center when you went to install the screws? Pretty ugly wasn't it - and hard to fix!
FEATURES:
- Self-centering nose piece centers itself in the hardware's countersink
- the bit drills a perfectly centered pilot hole.
- replaceable drill bits - simply loosen a set screw
- replaceable spring - unscrewing the hex drive shank from the knurled body.
- standard 1/4 in. hex shanks
- can be used with Make It Snappy use in Quick Change chucks.
Made in the USA.
Nose piece OD is 0.304 in.
| Product Group | Drill Bits |
|---|---|
| BRAND | Make It Snappy |
| Point Type | Standard |
| Drill Diameter | 9/64 in. |
| Shank Type | HEX, ball detent d |
| QUANTITY | (1) Each |
| SKU | MS-5109 |
| Prop 65 |
|
WARNING: While working in a hazardous areas where you can be exposed to flying objects, fragments, and particles, primary protective devices such as safety glasses or goggles with side shields must be worn. Secondary protective devices such as a face shield is required in conjunction with primary protective devices during severe exposure to impact hazards.
WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.
Login and Registration Form