Makes changing from drills to countersinks to driver bits - A Snap
FEATURES:
Adapter uses a collet to adapt standard round drill bits to a 1/4″ hex power bit shank
Works with Snappy Quick Change Chuck (MS-0011)
Adapter Shank Size = 1/4 in. hex
Adapter Drill Size = Made for 3/32 in. smooth shank drills
Collet will accept drills with diameters from .081 in. to .096 in.
Drill bit sold separately.
Always use a Hex Shank Socket (Part MS-42001) to protect the shank from damage when replacing twist drills or Use the Bench Mount Shank Wrench (Part MS-42881) for easier bit changes!
WARNING: While working in a hazardous areas where you can be exposed to flying objects, fragments, and particles, primary protective devices such as safety glasses or goggles with side shields must be worn. Secondary protective devices such as a face shield is required in conjunction with primary protective devices during severe exposure to impact hazards.
WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.
WARNING: While working in a hazardous areas where you can be exposed to flying objects, fragments, and particles, primary protective devices such as safety glasses or goggles with side shields must be worn. Secondary protective devices such as a face shield is required in conjunction with primary protective devices during severe exposure to impact hazards.
WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.
Login and Registration Form