Snappy 1/4 in. Shelf Pin Drill Guide W/ Flat Tip
Snappy 1/4 in. Shelf Pin Drill Guide W/ Flat Tip
Make It Snappy 1/4 in. Shelf Pin Drill Guide
Have you ever drilled hinge-screw pilot holes, and then discovered that they were off-center when you went to install the screws? Pretty ugly wasn't it - and hard to fix!
FEATURES:
- replaceable drill bits - simply loosen set screw,
- replaceable spring - unscrew the hex drive shank.
- standard 1/4 in. hex shanks can be used with Make It Snappy Quick Change chucks
- Nosepiece is 3/8 in. dia.
Made in the USA.
| BRAND | Make It Snappy |
|---|---|
| Point Type | Standard |
| Drill Diameter | 1/4 in. |
| Shank Type | HEX, ball detent d |
| QUANTITY | (1) Each |
| SKU | MS-6016 |
| Prop 65 |
|
WARNING: While working in a hazardous areas where you can be exposed to flying objects, fragments, and particles, primary protective devices such as safety glasses or goggles with side shields must be worn. Secondary protective devices such as a face shield is required in conjunction with primary protective devices during severe exposure to impact hazards.
WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.
Login and Registration Form