PicGenie123 Picture-Hanging Kit

This is the "New Mousetrap" for picture hanging!

Hang one picture or create a beautiful collage of pictures in minutes! PicGenie123™ accu-hanger brackets mark the exact nail placement for you and eliminates all the guesswork. Our accu-hanger brackets can be randomly placed on the back of your frame and your picture will always hang straight! That’s right. If one is higher or lower than the other one, your picture always hangs straight!

Hang pictures like a professional in a matter of minutes!

FEATURES:

Hang Pictures level
Space photo collages perfectly
Holds up to 30 lbs in drywall
Includes mounting brackets, nails, screws, augers and bumpers to hang 6 photos

INSTRUCTIONS:

Attach 2 brackets to the back top edges of picture frame using the screws provided.
Position your picture against the wall where you want it to hang and press top corners of the frame to make small indentation marks in the wall. (These indentations mark the exact spot where you install the nails or wall augers).
Pound nails straight into the marks, leaving the heads out 1/8".
Remove marking tabs using the 2-1/2" long nail included in each kit.
Hang your pictures on the nails. 
Step back and admire your work!

INCLUDES:

6 pairs of hanging brackets(12 total)
12 nails (for driving into wall where indicated by patented bracket)
24 screws (to attach the brackets to the frame)
4 augers (for insertion into wall for heavy frames)
1 pilot nail
1 break off tool
6 bumpers

Before making marks on Plaster or Hardboard walls, we suggest making two pads of 2” wide masking tape 4 or 5 layers thick and tape it to the wall where the Accu-Hanger brackets will be making the marks. The tip or point on the break-away marking tabs will make small indentations in both pads of masking tape when you push the picture frame against the wall. Tap nails in the marks far enough to make nail marks in the wall and remove them along with the masking tape. Then follow regular hanging instructions.

More Information