MATCHFIT Dovetail AP Clamp + X-Pad

• The Anti-Pivot Coil Spring prevents the clamp arm from pivoting and dropping when switching workpieces in repetitive processes. Save time and work faster without having to reset your clamp height for every part.
• Clamp in two directions with a single clamp.
• The included X-PAD™ simultaneously applies hold-down and in-line pressure as the clamp tightens. The combined forces keep your workpieces flat and eliminate the need for two or more different clamps.
• The V-groove profile gives you two points of contact to clamp round or oblong stock with ease.
• Clamp round stock with ease. Turn the X-PAD™ 90° to clamp round and oblong-profile stock with a single clamp.
• Use with a spacer to secure material from a distance. A spacer provides in-line pressure—leaving the top of the material unobstructed for sanding, flattening, template routing or CNC work.
• Use any standard 1/2 in.–14° dovetail router bit to route your own tracks virtually anywhere. Clamp without limits, and never buy expensive T-track again.

WARNING: This product can expose you to chemicals including Styrene, which is know to the Sate of California to cause cancer. For more information, visit www.P65Warnings.ca.gov.

WARNING: While working in a hazardous area where you can be exposed to flying objects, fragments, and particles, primary protective devices such as safety glasses or goggles with side shields must be worn. Secondary protective devices such as a face shield is required in conjunction with primary protective devices during severe exposure to impact hazards.

WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.