CrystaLac Polyoxide Wood Floor Finish - Gloss Finish - 1 Pint

CrystaLac® PolyOxide Wood Floor Finish – Gloss Finish – 1 Pint

CrystaLac® PolyOxide Wood Floor Finish is a durable, water-based polyurethane designed to provide tough, long-lasting protection for interior wood floors and other wood surfaces. Fortified with Aluminum Oxide and U.V. stabilizers, PolyOxide delivers excellent scuff resistance, a hard protective finish, and a beautiful gloss sheen without yellowing over time.

Ideal for residential and commercial woodworking projects, PolyOxide combines the durability needed for high-traffic wood floors with the easy application and cleanup of a water-based finish. It can be applied with a bristle brush, foam brush, lamb's wool applicator, by wiping, or by spraying, making it a versatile choice for floors, furniture, cabinets, doors, woodwork, and accessories.

Durable, Gymnasium-Tough Wood Floor Protection

PolyOxide is formulated with rubber-tough, self-curing, waterborne polyurethane resins and fortified with Aluminum Oxide for enhanced durability. U.V. stabilizers help protect the finish while maintaining its appearance, making it an excellent choice when you need a hard-wearing wood floor finish that resists everyday scuffs and wear.

Fast-Drying Water-Based Formula

One of the advantages of CrystaLac PolyOxide is its fast drying time. The finish can dry to the touch in approximately 35 minutes to 1 hour, with additional coats ready to be applied after about 2 hours. With multiple coats, many flooring projects can be completed in a single day, helping reduce project downtime.

Low-Odor, Easy Cleanup

The water-based formulation produces virtually no lingering paint smell, making PolyOxide a convenient choice for interior home improvement and woodworking projects. Cleanup is simple with warm, soapy water, eliminating the need for harsh solvent-based cleanup products.

Versatile Interior Wood Finish

CrystaLac PolyOxide can be applied to clean, properly sanded interior wood surfaces and is compatible with thoroughly dried oil-based or water-based stains. Use it to protect and beautify a wide range of wood surfaces, including floors, furniture, doors, cabinets, trim, woodwork, and accessories.

Application Instructions

• Stir the contents gently but thoroughly. Do not shake.
• Apply 3 to 5 coats, with 4 or more coats recommended for maximum floor protection.
• Allow approximately 2 hours of drying time between coats.
• Lightly scuff sand after the first coat to remove raised grain or fibers.
• Additional sanding between coats is generally not necessary.
• Do not use stearated sandpaper or tack cloths.
• Rinse brushes and applicators with warm, soapy water after use.
• Leftover PolyOxide may be stored in a clean, airtight container for future use.

PolyOxide Wood Floor Finish Properties

• Fast drying
• Water cleanup
• U.V. stabilized
• Scuff resistant
• Non-yellowing
• Non-flammable
• Non-toxic
• Low VOC
• No lingering paint smell
• Fortified with Aluminum Oxide
• Water-based polyurethane formula

Product Details

• Product: CrystaLac PolyOxide Wood Floor Finish
• Sheen: Gloss
• Size: 1 Pint
• Application: Bristle brush, foam brush, lamb's wool applicator, wipe-on, or spray
• Location: Interior wood surfaces
• Recoat Time: Approximately 2 hours
• Dry Time: Approximately 35 minutes to 1 hour
• Cure Time: Approximately 24 hours
• Cleanup: Water
• Coverage: Approximately 120–150 sq. ft. per quart
• Recommended Coats: 3 to 5 coats; 4 or more coats recommended for floors
• Recommended Uses: Floors, furniture, woodwork, doors, cabinets, and accessories

CrystaLac PolyOxide Gloss Wood Floor Finish provides a durable, scuff-resistant protective coating with the convenience of a fast-drying, water-based polyurethane. Its Aluminum Oxide fortification, U.V. stabilization, low odor, and easy water cleanup make it an excellent choice for protecting and enhancing interior wood surfaces.