CMT Industrial Sliding Fine-Finish Compound Miter & Radial Saw Blade, 10 in. x 80 Teeth, 5/8 in. Bore

CMT Industrial Fine-Finish Crosscut Saw Blade, 10 x 80 Teeth, 5/8 Bore

Diablo 8-1/2 in. x 60 ATB Fine Finish Saw Blade for Wood

Diablo 8-1/2 in. x 60 ATB Fine Finish Saw Blade for Wood

CMT Industrial Fine-Finish Crosscut Saw Blade, 8-1/2 in. x 60 Teeth, 5/8 in. Bore

$74.19
Availability: In stock
SKU
CM-0219-85

CMT Double Sided Saw Blade 8-1/2" x 60T

This blade is designed for Fine-Finish Cross cutting in hardwoods and two-sided laminates.

The tooth pattern combines four 30° ATB (Alternating Top Bevel) teeth followed by 1 TCG (Tipple Chip Grind) tooth. The 30° angle is much steeper than general purpose ATB blades (typically 15°). This scores through the wood fibers on both sides of the cut. The Triple Chip Grind tooth rakes out the material between the scored cuts made by the ATB teeth. This results in a smooth fine-finish cut.

The negative hook angle is another important feature of the blade. With the hook angle set back 5°, the blade slices through the wood fibers which greatly reduces splintering.

FEATURES:

  • Tooth pattern of four 30° ATB teeth followed by one TCG tooth.
  • Total number of teeth = 60
  • Micro-grain carbide teeth brazed to the blade
  • Expansion noise and vibration reducing slots
  • Non-stick PTFE coating keeps blade running cool, reduces pitch buildup, and protects against corrosion
  • Manufactured following precise procedures and perfectly balanced

 

Imported.

More Information
BRANDCMT
Blade Diameter8-1/2 in.
Arbor Diameter5/8 in.
BLADE TYPECross Cut
Hook AngleNegative 5 degrees
QUANTITY(1) Each
KERF Width0.118
CUTSWood
Tooth TypeATB (Alternating Top Bevel)
FOR USE WITHTable Saw
SKUCM-0219-85
SPECS:
  • Diameter = 8-1/2 in.
  • Bore = 5/8 in.
  • Tooth Type = (4) 30° ATB plus (1) TCG
  • Hook Angle = -5°
  • Kerf = 0.118 in.
  • Plate = 0.098 in.
  • # Teeth = 60
Prop 65

Prop 65 WarningWARNING: This product can expose you to chemicals including nickel and cobalt, which are known to the State of California to cause cancer and lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.

Write Your Own Review
You're reviewing:CMT Industrial Fine-Finish Crosscut Saw Blade, 8-1/2 in. x 60 Teeth, 5/8 in. Bore
Your Rating

Prop 65 WarningWARNING: This product can expose you to chemicals including nickel and cobalt, which are known to the State of California to cause cancer and lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.

We found other products you might like!
Contact Us