Freud 8-1/2 in. Fine-Finish Sliding Compound Miter Saw Blade, 48 Carbide ATB Teeth, Neg. 5 Deg. Hook, 5/8 in. Arbor

Freud 8-1/2 in. Fine-Finish Sliding Comp. Miter Saw Blade, 48 Carbide ATB Teeth,

CMT Industrial Fine-Finish Sliding Compound Miter & Radial Saw Blade, 8-1/2 in. x 60 Teeth, 5/8 in. Bore,CMT,CM-0219-85

CMT Industrial Fine-Finish Crosscut Saw Blade, 8-1/2 in. x 60 Teeth, 5/8 in. Bore

CMT Industrial Fine-Finish Crosscut Saw Blade, 10 x 80 Teeth, 5/8 Bore

$92.75
Availability: In stock
SKU
CM-0219-10

CMT Saw Blade, 10 in. x 80-Teeth

CMT Industrial Fine-Finish Crosscut Saw Blade for Sliding Compound Miter & Radial-Arm Saws, 10 in. x 80 Teeth, 5/8 in. Bore

This blade is designed for Fine-Finish Cross cutting in hardwoods and two-sided laminates.

The tooth pattern combines four 30 degree ATB (Alternating Top Bevel) teeth followed by 1 TCG (Tipple Chip Grind) tooth. The 30-degree angle is much steeper than general purpose ATB blades (typically 15°). These scores run through the wood fibers on both sides of the cut. The Triple Chip Grind tooth rakes out the material between the scored cuts made by the ATB teeth. This results in a smooth, fine-finish cut.

The negative hook angle is another important feature of the blade. With the hook angle set back 5 degree, the blade slices through the wood fibers, greatly reducing splintering.

FEATURES:

  • Tooth pattern of four 30° ATB teeth followed by one TCG tooth.
  • Total number of teeth = 80
  • Micro-grain carbide teeth brazed to the blade
  • Expansion noise and vibration reducing slots
  • Non-stick PTFE coating keeps the blade running cool, reduces pitch buildup, and protects against corrosion
  • Manufactured following precise procedures and perfectly balanced

Fine-Finish Crosscut Saw Blade

More Information
Product GroupCircular Saw
BRANDCMT
Blade Diameter8-1/2 in.
Arbor Diameter5/8 in.
BLADE TYPECross Cut
Hook AngleNegative 5 degrees
QUANTITY(1) Each
KERF Width0.118
Tooth TypeATB (Alternating Top Bevel)
SKUCM-0219-10
SPECS:
  • Diameter = 10 in.
  • Bore = 5/8 in.
  • Tooth Type = (4) 30° ATB plus (1) TCG
  • Hook Angle = -5°
  • Kerf = 0.118 in.
  • Plate = 0.098 in.
  • # Teeth = 80
Prop 65

Prop 65 WarningWARNING: This product can expose you to chemicals including nickel and cobalt, which are known to the State of California to cause cancer and lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.

Write Your Own Review
You're reviewing:CMT Industrial Fine-Finish Crosscut Saw Blade, 10 x 80 Teeth, 5/8 Bore
Your Rating

Prop 65 WarningWARNING: This product can expose you to chemicals including nickel and cobalt, which are known to the State of California to cause cancer and lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.

We found other products you might like!
Contact Us