3/4 in. W x 3/32 in. T x 12 in. Dia. Urethane Band Saw Tires - 2-Pack

3/4 in. W x 3/32 in. T x 12 in. Dia. Urethane Band Saw Tires - 2-Pack

Upgrade your old band saw performance by simply changing the old tires! 3/4 in. W x 3/32 inch Band saw Tires

Made in the USA from materials sourced in the USA. Each urethane band saw tire is crafted to meet your band saw's machining requirements for a perfect fit. Custom band saw tires are made to your specs.

How to install urethane tires.

Always unplug your saw while servicing!

Unlike the rubber tires that came with your saw, urethane tires are much smaller and have to be stretched on. If you can, it is recommended to remove the wheels for better access and control while installing the tires.

After removing the old tires, clean the wheels of debris and adhesive. Some of the smaller tires can be stretched on by hand. If not, start by clamping the tire to the wheel, then work the tire on in both directions, adding clamps as you go. You can use a dowel rod or smooth tool to pry the tire on. Once the tire is on the wheel, the stretch will need to be evened out. With a dowel between the tire and the wheel, roll it around the entire wheel. Reassemble your saw.

FEATURES:

• More durable than rubber tires
• Will not dry rot
• Simple installation with no need for glue

Simple, clean installation:

1. Warm water installations - A common practice for installing a band saw tire is to warm it up before stretching it on. It does make it easier, but it can also cause unwanted problems. If the urethane gets too hot, it can alter the characteristics of the tire, which keeps it tight to the wheel. You may need adhesive. If you choose to warm your tires this way, use hot tap water, which is usually 125 degrees. The absolute limit is 140 degrees
2. Then, stretch it onto the wheel
3. Let it cool in place for 6 hours before use

SPECS:

• 12" Diameter
• 3/4" Width
• 3/32" thick

These tires will fit 12" Band Saw wheels.