Trend Straight Guide for Routers, Jigsaws, and Circular Saws - 100 L
Two 56 inch extrusions to give 100 in. Ideal for 4 x 8 sheet material
Trend Straight Guide for Routers, Jigsaws, and Saws
Straight Edge for guiding routers, circular saws, and jigsaws 100 in. long.
Two lengths of extrusion with a jointing piece to give a maximum working length of 100 in. (2540mm). Reduced length for easier transport and storage. Clamps can slide along each extrusion.
Maximum material clamp thickness 1-1/4 in. (32mm). An adjustable friction washer on the clamps prevents the clamp from sliding too freely. One extrusion has a dual metric/imperial scale. Can be combined with Varijig parts.
Includes:
- (1) 56" alloy extrusion with scale
- (1) 56" alloy extrusion
- (1) connecting block; (1) 4mm hex key
- (2) sliding clamps.
Two 56-inch extrusions to give 100 in. Ideal for 4 x 8 sheet material
| BRAND | Trend |
|---|---|
| QUANTITY | (1) Each |
| SKU | TR-2510 |
| SPECS: |
|
| Prop 65 |
|
WARNING: While working in a hazardous areas where you can be exposed to flying objects, fragments, and particles, primary protective devices such as safety glasses or goggles with side shields must be worn. Secondary protective devices such as a face shield is required in conjunction with primary protective devices during severe exposure to impact hazards.
WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.
Login and Registration Form