Tread Tape Gorilla Glue - 2 in. x10 Feet

Tread Tape Gorilla Glue - 2 in. x10 Feet

Gorilla Anti-Slip Tread Tape is designed to help prevent slips and falls by providing durable traction to wet, slick or high traffic areas.

The multiple layers of protective coating ensure a heavy duty long lasting, durable grit for both indoors and out.

What surfaces can the tape be applied to?

Gorilla Anti-Slip Tread Tape is perfect for ladders, steps, ramps, boats, RVs, decks, and more! Typical surfaces are sealed wood, composite decking, metal (steel/aluminum), and sealed concrete.

Do you need to use a primer before applying?

Many applications require only a clean dry surface. Unsealed concrete and bare wood surfaces will have to be painted, stained, or sealed to ensure they don't allow unwanted moisture to contact the adhesive for extended periods of time. Follow all manufacturer's directions for paints, stains, or sealers to ensure the surface is ready prior to application of Gorilla Anti-Slip Tread Tape.

How do I apply Gorilla Anti-Slip Tread Tape?

Surfaces must be clean, dry and free of dirt, grease, and oil. Clean using isopropyl alcohol. Dry thoroughly. Cut tape to desired length and round corners. Remove liner and apply to surface starting at the center and moving toward the edges.

How do I remove Gorilla Anti-Slip Tread Tape from my surface?

Slowly peel Gorilla Anti-Slip Tread Tape from one edge or corner. Peel or scrape remaining adhesive on the surface and apply an adhesive remover to lift any remnants. Thoroughly clean surface of any remaining adhesive before installing fresh Gorilla Anti-Slip Tread Tape.

PRODUCT FEATURES

• Durable Grit: Multiple Layers of Protective Coating
• Weatherproof: Indoor/Outdoor
• Slip Resistant: Traction on Wet & Slick Surfaces
• Uv Resistant
• Cuts with Scissors
• Helps Meet OSHA & ADA Coefficient of Friction Recommendations#42;
• Great for: Sealed Wood, Composite Decking, Metal (Steel/Aluminum), Sealed Concrete, and More!

DIRECTIONS:

1. Surfaces must be flat, dry and free of dirt, grease, and oil. Clean using isopropyl alcohol. Dry thoroughly.
2. Cut tape to desired length and round corners.
3. Remove liner and apply to surface starting at the center and moving toward the edges.

IMPORTANT:
Apply when temperature is above 39deg; F. In#45;use temperature range: #45;40deg; F to 220deg; F. Prime and seal all wood and concrete before use. Not recommended for areas with continuous water submersion such as pools, tubs, and spas. Avoid placing Tread Tape in grout lines, cracks or to bridge gaps.

#42; This product has not been endorsed by OSHA or ADA.