Titebond Provantage Construction Adhesive 10 Oz

Titebond Provantage Construction Adhesive 10 Oz

Titebond PROvantage Heavy Duty Construction Adhesive is a premium-grade formula designed for more demanding construction and repair projects. It provides a strong grab, fills gaps and irregularities, and will remain permanently flexible. This professional strength formula will bond to most common building materials.

Features & Benefits

• Best choice for extreme temperatures Recommended For:  Demanding interior/exterior construction, installation, and repair projects.
• Compatible Materials:  Common building materials including wood, metal, brick, marble, ceramic tile, concrete, drywall, OSB, particleboard, and wet, frozen, and treated lumber. Durable strength for demanding projects VOC-compliant solvent
• Waterproof
• Superior strength
• Extrudes 0-F - 100 degree F
• Bonds heaviest materials
• Fast initial grab
• Exceptional durability

Application Guidelines

• Application Temperature: 0°F to 100 degrees F
• Service Temperature Range: -20°F to 120 degree F
• Working Time: Approximately 15 minutes for a 1/4" bead
• Prep: Surfaces must be clean and free of any material that may prevent adequate adhesion.
• Application: Cut tip on slant for 1/4 to 3/8 bead. For subfloors, cut the tip straight across. Puncture the inner seal and place it in the cartridge gun. Apply adhesive to one of the surfaces, either as a continuous bead or as spot beads. Adhere to materials within 15 minutes. Press the surfaces together firmly with a slight twisting motion. Certain large applications may require additional bracing until the adhesive has dried.
  Note: For subfloors, apply adhesive to joists for one sheet at a time. Nail or screw each sheet as recommended by the American Plywood Association.
• Cleanup: Tools and adhesive may be cleaned with acetone or mineral spirits. Follow the solvent vendor's precautions.
• Limitations: Not designed for continuous submersion or for use on plastics, polystyrene, or polyethylene foams. Do not adhere one non-porous material to another since this will slow or prevent drying.

Physical Properties

Coverage

Specifications & Certifications

• Exceeds the requirements of APA AFG-01, ASTM D3498 and ASTM C557.