Titebond II Premium Glue - Bottle 8 Oz

TITEBOND II PREMIUM WOOD GLUE

Titebond II Premium Wood Glue is the only leading brand, one-part wood glue that passes the ANSI Type II water-resistance specification. It is ideal for exterior woodworking projects, including outdoor furniture, birdhouses, mailboxes, planters and picnic tables. Titebond II Premium provides a strong initial tack, fast speed of set, superior strength and excellent sandability. It is FDA-approved for indirect food contact (cutting boards) and is ideal for radio frequency (RF) gluing systems.

Features & Benefits

• First one-part wood glue to pass ANSI Type II water-resistance
• Premium Glue - Bottle 8 Oz
• Designed for exterior use
• Excellent sandability
• Unaffected by finishes
• FDA approved for indirect food contact
• Ideal for radio frequency (R-F) and hot press gluing systems
• Easy cleanup with water

Application Guidelines

• Application Temperature: Above 55°F
• Open Assembly Time: 3-5 minutes (70°F./50%RH)
• Total Assembly Time: 10-15 minutes (70°F./50%RH)
• Minimum Required Spread : Approximately 6 mils or 250 square feet per gallon
• Required Clamping Pressure: Enough to bring joints tightly together (generally, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods)
• Method of Application: Plastic bottles for fine applications; glue may also be spread with a roller spreader or brush.
• Cleanup: Damp cloth while glue is wet. Scrape off and sand the dried excess.
• Limitations: Titebond II Premium Wood Glue is not for continuous submersion or for use below the waterline. Not for structural or load-bearing applications. Do not use when the temperature, glue or materials are below 55°F. Due to low pH, the product may cause corrosion on metal surfaces. Test the product before use, as rusting/corrosion may be a concern. Freezing is not good; it does not always affect the function of the product, but it may cause it to thicken. Agitation should restore the product to its original form. Due to variations in the surface of treated lumber, it is advisable to test for adhesion. For best results when gluing exotic or oily woods, such as Ipe and Teak, please contact our Technical Support Team at 1-800-347-4583. Read MSDS before use. KEEP FROM FREEZING. KEEP OUT OF THE REACH OF CHILDREN.

Physical Properties

• Type Cross-linking polyvinyl acetate
• Calculated VOC 3.0 g/L
• State Liquid
• Weight Per Gallon 9.1 lbs.
• Color Honey cream
• Dried Film Translucent, yellow
• Solids 48%
• Freeze/thaw Stability Stable
• Flashpoint > 200°F
• Viscosity 4,000 cps
• pH 3.0
• Chalk Temperature To assure a good bond, 55°F is the lowest recommended temperature of the glue, air and materials during application.
• Storage Life 24 months in tightly closed containers at 75°F

Bond Strength ASTM D-905 (On Hard Maple)

SPECIFICATIONS

• CONFORMS TO ASTM D-4236

Caution Statement

CAUTION: EYE AND SKIN IRRITANT. Contains aluminum chloride. Do not swallow. Do not allow eye contact or prolonged skin contact.
FIRST AID: If swallowed, do not induce vomiting; contact physician. If eye contact occurs, flush with water for 15 minutes. Wash skin contact areas with soap and water. If irritation from eye or skin contact persists, contact physician. For additional information, refer to Safety Data Sheet.
KEEP OUT OF THE REACH OF CHILDREN.