Snappy Tapered Plug Cutter 1/2 in.
Snappy Tapered Plug Cutter 1/2 in.
1/2 in. Tapered Plug Cutter
Use tapered plug cutters to cut your own plugs to conceal screws and other fasteners. Use scraps to match wood grain, making the plug nearly invisible or, for a decorative look; use a contrasting wood.
Plug cutters produce a tapered plug, so you get a tight fit with no glue needed. The chamfered nose makes it easy to get the plug started into the bore.
Four precision-milled angles on each of the four flutes ensure a smooth cut and a tight-fitting, consistent taper.
Heat-treated to provide excellent wear resistance and a long cutting life.
- Drive Shank: 1/4 in. Hex Power Bit Shank
- Plug Size: 1/2 in.
- Always bore to the maximum depth of the cutter
- Pop out the plug with a screwdriver and insert the chamfered end in the hole
- Tap it with a hammer and trim the remaining plug flush to the surface
For use in drill press only, with board clamped to table
Recommended Maximum RPM: 1000
Always wear approved eye protection
| NOMINAL DIAMETER | 1/2" |
|---|---|
| CUT DEPTH | 9/16" |
| QUANTITY | (1) Each |
| Shank Type | Hex, no detent d |
| BRAND | Make It Snappy |
| SKU | MS-0332 |
| Prop 65 |
|
WARNING: While working in a hazardous areas where you can be exposed to flying objects, fragments, and particles, primary protective devices such as safety glasses or goggles with side shields must be worn. Secondary protective devices such as a face shield is required in conjunction with primary protective devices during severe exposure to impact hazards.
WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.
Login and Registration Form