Freud Round over Router Bit,13/16 x 1/2 x 1/4

Freud 34-106 Round Over Router Bit

The Freud 34-106 Round Over Router Bit is a carbide-tipped rounding-over bit used to soften sharp edges and create smooth, decorative radii on wood.

This specific model is the 5/32 in. radius version, which means it produces a relatively small, subtle round-over profile.

• Radius: 5/32 in.(light edge-softening profile)
• Cut diameter: 13/16 in.overall
• Shank: 1/4 in.
• Cutting height: 1/2 in.
• Bearing-guided: yes (for edge following)
• Material use: hardwood, softwood, plywood, composites
• Use cases: furniture edges, cabinet doors/drawers, trim work

This bit is used to round over sharp edges on wood, typically for:

• furniture edges (tables, shelves, cabinets)
• decorative trim
• softening plywood or hardwood edges

The 13/16 in. diameter gives a fairly noticeable rounded edge (larger than a small “break-the-edge” radius), while the 1/4 in. shank means it’s intended for trim routers or lighter-duty routing.

Compatibility

• Fits any router with a 1/4 in. collet
• Works on both handheld routers and router tables (with in.safe feed limits)
• Best suited for light-to-medium passes (don’t try to hog full depth in one go)

Buying Tip

If you’re deciding between this and similar Freud round-over bits:

• Smaller diameter (1/8 in.–1/4 in. radius) = subtle edge break
• This 13/16 in. size = clearly visible decorative roundover