Pozidriver Bits w Wire Detent - Select Your Size
Pozidriver Bits w Wire Detent - Select Your Size
Drive Pozidriv screws with confidence!
Euro style hardware has virtually standardized on the PoziDriv recess for mounting everything from drawer slides to hinges. In addition, most adjustment screws on Euro hardware are PoziDrive. While a Phillips driver can be used, a PoziDriv bit will provide more positive engagement and more satisfactory results.
Pozidriv (sometimes misspelled) is similar to a Phillips Drive. The GKN Screw and Fastener Company developed a solution to address a common Phillips problem. Cam Out is when the bit slips out of the recess when the torque exceeds the forward pressure to keep the bit in the recess.
Pozsidriv bits are different from Phillips in that they feature small ridges inside of each cross-section. These small ridges help provide better contact with the recess surfaces, providing greater torque and a lower likelihood of camming out than a Standard Phillips. Pozidriv is similar to Phillips in that both have the same self-centering design.
How do you tell the difference between Pozidriv and Phillips? Looking at the Head Recess, Pozidriv will have 4 notches cut in the head between the recess notches.
Can you use Pozidriv Bits to drive Phillips screws and vice versa? The two different drives are not the same shape and depth of the recess. You can, but the potential for slippage is much higher than with the correct bit. That being said, we do not recommend doing that.
| Product Group | Driver Bits |
|---|---|
| BRAND | McFeely's |
| BIT LENGTH | 1 in. |
| REG / IMPACT | Standard Duty |
| DRIVE TYPE | Pozidriv |
| DETENT | Wire |
| QUANTITY | (1) Each |
| SKU | HPD-XXXX |
| Prop 65 |
|
WARNING: While working in a hazardous areas where you can be exposed to flying objects, fragments, and particles, primary protective devices such as safety glasses or goggles with side shields must be worn. Secondary protective devices such as a face shield is required in conjunction with primary protective devices during severe exposure to impact hazards.
WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.
Login and Registration Form