MATCHFIT Reverse Dovetail Bit
For Use with Router, Router Table, MATCHFIT Dovetail Clamps
MATCHFIT Reverse Dovetail Bit
Patented Reverse Flair Profile for less sanding
- Reversed Dovetail locates and holds clamp head in place
- 3/8 in. (9.5mm) groove keeps clamps below the surface
- Use to make joinery
Features and Benefits
- Reverse Dovetail groove that locates MATCHFIT Clamp heads on top of jigs and templates.
- Use in 1/2 in. or thicker stock with the Dovetail Clamp below the work surface.
- Set the cut 3/8 in. (9.5mm) deep quickly with the MATCHFIT Setup Gauge.
- 14,000 RPM recommended, Maximum 24,000 RPM
Reverse Dovetail Slide Joint
- Cut a reverse dovetail groove in one part
- Cut a matching tongue in a second part
- Joint can be used for drawers and slides
| Product Group | Router Bits |
|---|---|
| BRAND | MICROJIG |
| SHANK SIZE | 1/2 in. |
| QUANTITY | (1) Each |
| SKU | MJ-MB-025-R1438 |
| Prop 65 |
WARNING: This product can expose you to chemicals including Styrene, which is know to the Sate of California to cause cancer. For more information, visit www.P65Warnings.ca.gov.
|
WARNING: This product can expose you to chemicals including Styrene, which is know to the Sate of California to cause cancer. For more information, visit www.P65Warnings.ca.gov.
WARNING: While working in a hazardous area where you can be exposed to flying objects, fragments, and particles, primary protective devices such as safety glasses or goggles with side shields must be worn. Secondary protective devices such as a face shield is required in conjunction with primary protective devices during severe exposure to impact hazards.
WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.
Login and Registration Form