MATCHFIT 1.5" Dovetail Track Hardware Screws
For Use with Router, Router Table, MATCHFIT Dovetail Clamps
MATCHFIT 1.5 in. Dovetail Track Hardware Screws
Create a variety of jigs that move freely, and tighten down anywhere you can route a groove. Compatible with standard 1/2 in. 14-degree dovetail profile. The 6-Pack includes (6) 1.5 in. Track Screws.
MicroJig MATCHFIT Dovetail Hardware has taken the woodworking community by storm, allowing users the freedom to use, hold and fasten parts where and how they need them without expensive T-Track components. And now we have made the hardware even better. You will get all the benefits of the original hardware, along with components and improved quality!
With any standard 1/2 in. 14-degree dovetail router bit, you can create your own tracks, eliminating the need for expensive aluminum tracks. It's an entire system designed to give you all the functionality of t-track and t-track accessories at a fraction of the cost.
The hardware pack will be sets of six parts.
Always improving, MicroJig has worked with our manufacturers to improve the quality of the MATCHFIT Hardware. The molded parts of all components are made of a stronger resin for greater strength, and the threaded sections of the track screws are now full length to add more reach when clamping.
The 1.5 Track Screw clamps up to 1-1/4 in. thick.
| BRAND | Micro Jig |
|---|---|
| SKU | MJ-DV-HL1.5K6 |
| SPECS: |
|
| Prop 65 |
WARNING: This product can expose you to chemicals including Styrene, which is know to the Sate of California to cause cancer. For more information, visit www.P65Warnings.ca.gov.
|
WARNING: This product can expose you to chemicals including Styrene, which is know to the Sate of California to cause cancer. For more information, visit www.P65Warnings.ca.gov.
WARNING: While working in a hazardous area where you can be exposed to flying objects, fragments, and particles, primary protective devices such as safety glasses or goggles with side shields must be worn. Secondary protective devices such as a face shield is required in conjunction with primary protective devices during severe exposure to impact hazards.
WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.
Login and Registration Form