Kreg Adaptive Cutting System Extension Brackets

Kreg® ACS Project Table Extension Brackets

Brackets for extending the Adaptive Cutting System Project Table work area

Add more workpiece support to the Adaptive Cutting System Project Table for full sheets of plywood or long boards with the Project Table Extension Brackets. These brackets mount in the aluminum perimeter frame of the Project Table and accept 2x4 boards that can then be supported at the other end by a Kreg® Track Horse, Mobile Project Center, or another work support.

Made from thick steel, the Project Table Expansion Brackets are adjustable to position the 2x4s in two ways: flush with the surface of the Project Table, or 3/4 in. below the surface, which allows for adding a plywood surface to the enlarged table. Holes in the sides of the brackets allow driving the included screws into the 2x4s to hold them in place in the brackets.

*Designed for use with the Adaptive Cutting System Project Table. Sold as a Pair.

• Mount in aluminum table perimeter and accept 2x4 boards to extend work area of Project Table
• 2x4s can be supported by a Kreg® Track Horse, Mobile Project Center, or another work support
• Adjustable to position 2x4 supports flush with table surface, or 3/4\ in. below when adding a plywood table surface is desired
• Durable steel construction

Features

• Expands the Adaptive Cutting System Project Table work area
• Accept 2x4s to create sturdy supports
• Works with Kreg Work Supports and other kinds

Construction

Steel

adjustability

Adjustable support knobs

Capacity

• 48 in. maximum cut length with track on table
• 48 in. maximum measured cut width with rack on table
• Supports full-size sheet goods as well as solid-wood boards

Compatibility

• Adaptive Cutting System Master Kit
• Adaptive Cutting System Project Table Kit
• Adaptive Cutting System Project Table Top
• Track Horse
• Mobile Project Center

Includes

• (2) Project Table Extension Brackets
• (4) 1 1/4 in. screws
• (1) Owner's Manual