Heavy Duty Leg Adjuster - Qty:1

Heavy Duty Leg Adjuster

This Super Adjusting Glide is specially engineered to support extra-heavy items such as cabinets.

Unfortunately, most woodworkers do not have the luxury of a shop with a level floor. That means, at least for me, that virtually every piece of equipment in my shop is propped up on a variety of shims - which work fine until I need to move the tool across the shop. Then I get to re-shim it.This innovative adjustable leg leveler is just the thing to make your shop tool, benches, and work tables level without shims.A recess in the top of the bolt makes adjustment with an Allen wrench easy under a full load. The steel base pivots and is capped in polyethylene to protect carpeting.

Sold by the each, a set of 4 will allow a load rating of 800 lbs. per set.

Specs:

• The glide is made of cold rolled steel, 0.079 inch thick
• 3 in. long, 3/8 in. diameter and a 1-3/8 in. projection bolt has a hex recess in the end to allow for adjustment under load.
• 2-1/8 in. wide by 2-1/16 in. high mounting plate
• 1-1/4 in. diameter nylon covered foot
• Finish: Zinc-plated steel