GT E Pro Mortise and Tenon Jig

General EZ Pro™ Mortise and Tenon Jig

Mortise and Tenon joinery has been around for a long time; a seriously long time - it's actually ancient history. But, it's always been difficult to ensure that they line up correctly and are sized appropriately. Using a plunge router with the jig, mortises and tenons can easily be cut ranging from 1/4" to 1/2" thick and from 1" to 3" wide in materials from 1/2" to 1-1/2" thick. 

FEATURES:

• Comes assembled ready to use to produce 1/4" mortise and tenon joints.
• The jigs can be mounted on your workbench or can be mounted to a board which is then attached to your workbench and removed for storage if workbench space is at a premium.
• The jig is manufactured from T6 aircraft aluminum for durability.
• Thumb screws hold your work piece in place.
• Sliding templates allow you to adjust the length of the joint and a swing arm centers and aligns your cuts.
• The jig is 14-1/2" x 3-1/4" x 4".

Includes:

• A wrench for the guide sleeve,
• a 1/4" up-cut spiral bit,
• a bushing kit,
• a centering pin, and
• a User's Manual.

Imported.