Fastcap Hooker, Sink Cut-Out Support - 5 Pack
FastCap Hooker, Sink Cut-Out Support
Support Sink Cut-Outs without Help!
Now you can make sink cut-outs without assistance! Just drill your 1/4" starting holes at the midpoint of each side. As the cut progresses, insert a Hooker into the saw kerf behind the saw, advance it to a starting hole, and then twist it to support the sink cut-out waste. Once finished, use the Hookers to lift the cut-out free.
The FastCap Hooker is completely reusable and works with both 1/2" and 5/8" thick countertops. Only one Hooker per side is required.
Comes 5 per pack.
| BRAND | FastCap |
|---|---|
| QUANTITY | 5-Pack |
| SKU | FSC-7010 |
| Prop 65 |
WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood. |
WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.
Login and Registration Form