Fastcap Dually Grommets - Almond - Qty:25 - EOL

FastCap^® Dually Grommet™

Dresses up access holes in desks and other furniture - No Gluing! Great for desks, cabinets or wherever access holes are required.

The Dually Grommet is what cabinetmakers have been asking for. The two-sided grommet snaps together adding a finished look to both sides of an access hole. Grommet fits perfectly in a 2-1/2 in. diameter hole.

To install, trim the longer half of the Dually Grommet to 1/4 in. less than the thickness of the material. So for a 3/4 in. panel, the longer half should be trimmed to 1/2 in. measured from the underside of the flange. The grommet is marked with trim rings at 1/4 in. increments. Then snap both halves together inside the access hole.

FEATURES:

• No Gluing needed; both halves of the grommet snap together.
• Adds a finished look on both sides of the access hole.
• Fully paintable.

DIMENSIONS:

• Outside diameter = 2-1/2 in.
• Inside diameter = 2-1/4 in.
• Flange diameter = 3-1/4 in.
• Thickness of connected grommet halves = 3/4 to 2-1/2 in.

Imported.