CMT Dovetail Bit, 11/32 in. Dia., 7 Deg., 5/8 in. Bearing - 1/4 in. Shank

CMT Dovetail Bit, 11/32 in. Dia., 7 Deg., 5/8 in. Bearing 1/4 Shk

CMT 1/2 in. Dovetail Bit - 1/2 in. Shank-

CMT 1/2 in. Dovetail Bit - 1/2 in. Shank

CMT Dovetail Bit, 3/8 in. Dia., 14 Deg., 1/2 in. Bearing 1/4 Shk

$31.18
Availability: In stock
SKU
CM-818-09

CMT Dovetail Bit, 3/8 in. Dia., 14 Deg., 1/2 in. Bearing - 1/4 in. Shank

The beautifully crafted dovetail joint is a classic that appeals to both professionals and novices alike.

Shop Tips: Two passes are recommended when routing dovetails with a template. Check that the dovetails have been cut through completely and smoothly before removing the workpiece. For even easier routing and less stress on your dovetail bit, run the first pass with a straight bit. Use a dovetail on your router table equipped with a fence to achieve difficult chamfer angles.

Safety Tips: If the dovetail bit jams while working, adjust the position of the bit in the collet and ensure the cutting depth is appropriate. Do not lift the router out of the template.

  • Diameter: 3/8 in.
  • Cuttter Height: 3/8 in.
  • Length: 2-3/8 in.
  • Degree of Cut: 14°
  • Shank Dia.:1/4 in.
  • Bearing Position: Bottom
  • Bearing Diameter: 1/2 in.
More Information
Product GroupRouter Bits
BRANDCMT
SHANK SIZE1/4 in.
GUIDE POSITIONBottom
QUANTITY(1) Each
Overall Length2-3/8 in.
OVERALL DIAMETER3/8 in.
CUTTER HEIGHT3/8 in.
SKUCM-818-09
Prop 65

Prop 65 WarningWARNING: Drilling sawing sanding or machining wood products can expose you to wood dust a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.

WARNING: This product can expose you to chemicals including nickel, cobalt and formaldehyde, which are known to the State of California to cause cancer and lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Write Your Own Review
You're reviewing:CMT Dovetail Bit, 3/8 in. Dia., 14 Deg., 1/2 in. Bearing 1/4 Shk
Your Rating

Prop 65 WarningWARNING: Drilling sawing sanding or machining wood products can expose you to wood dust a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.

WARNING: This product can expose you to chemicals including nickel, cobalt and formaldehyde, which are known to the State of California to cause cancer and lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Contact Us