CMT 1/2 Dia. x 1/2 Carbide Height Flush Trim Router Bit - 1/4 Shank
CMT 3-in-1 Flush Trim Bit for MDF/Laminates
Solves 3 of the most common problems that occur in flush trimming in cabinet shops
- The anti-stick properties of the Delrin® bearing greatly reduces the likelihood of freezing of the bearing from glue.
- The extended guide surface of the Delrin bearing will perfectly match the work surface without scratching like the steel bearing would.
- The shear angle cutting edge reduces the need for filing. 3 in 1 bits are ideal on plastic laminates as well as aluminium laminates
Thanks to the innovative conical edges of this bit, you could re-sharpen up to six times without any problem.
the most popular problem you have with the standard flush trim bits is the undersize diameter after re-sharpening which leaves the mark on the material; now with the new CMT construction you could re-sharpen up to six times without any problem. Just remember to adjust your bit up or down.
Imported.
| Product Group | Router Bits |
|---|---|
| BRAND | CMT |
| SHANK SIZE | 1/4 in. |
| GUIDE POSITION | Bottom |
| QUANTITY | (1) Each |
| Overall Length | 2-9/64 in. |
| OVERALL DIAMETER | 1/2 in. |
| CUTTER HEIGHT | 1/2 in. |
| SKU | LT5-4016 |
| Prop 65 |
|
WARNING: This product can expose you to chemicals including nickel and cobalt, which are known to the State of California to cause cancer and lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.
Login and Registration Form