8 x 3-1/8 in. GRK Cap Head Composite, Climatek, Star - Qty:514
was $68.36 Special Price $51.27
Availability: In stock
SKU
0832-RTT-V
8 x 3-1/8 in. GRK Cap Head Composite, Climatek, Star - Qty:514The GRK Trim head screws have a small head for fine trim applications including decking and trim casings and moldings
FEATURES:
- Steel Core for strength
- Climatek coating for corrosion resistance. (Stainless Steel is recommended for wet or oceanside environments)
- Reverse threading near the fastener head helps prevent bulging on the board surface as the screw head is set.
- Self-tapping W-Cut thread design prevents most material splitting
- Zip-Tip™ point assists in easy driving.
INSTALLATION NOTES:
- Trim screws should be driven at half speed.
- Care should be taken not to overdrive fasteners. Backing out over-driven fasteners will result in bulging in the board's surface.
- McFeely's recommends using either a driver drill with adjustable torque settings or a driver bit with depth-stop
- To avoid over-driving fasteners and to prolong drive bit life, McFeely's does not recommend use of an impact driver.
- Pilot holes are only needed if the building material manufacturer requires it. Always check with the manufacturer's literature for installation recommendations.
The GRK Trim head screws have a small head for fine trim applications including decking and trim casings and moldings
FEATURES:
- Steel Core for strength
- Climatek coating for corrosion resistance. (Stainless Steel is recommended for wet or oceanside environments)
- Reverse threading near the fastener head helps prevent bulging on the board surface as the screw head is set.
- Self-tapping W-Cut thread design prevents most material splitting
- Zip-Tip™ point assists in easy driving.
INSTALLATION NOTES:
- Trim screws should be driven at half speed.
- Care should be taken not to overdrive fasteners. Backing out over-driven fasteners will result in bulging in the board's surface.
- McFeely's recommends using either a driver drill with adjustable torque settings or a driver bit with depth-stop
- To avoid over-driving fasteners and to prolong drive bit life, McFeely's does not recommend use of an impact driver.
- Pilot holes are only needed if the building material manufacturer requires it. Always check with the manufacturer's literature for installation recommendations.
| SIZE (#8, #10 ...) | #8 |
|---|---|
| LENGTH | 3-1/8 in. |
| MATERIAL | Corrosion Resistant Coated |
| COUNTERSINK NIBS | Without Nibs |
| RECESS TYPE | Star / Torx |
| HEAD | Composite Cap-Head |
| POINT TYPE | Type 17 |
| BRAND | GRK |
| RECESS SIZE | T-10 |
| QUANTITY | Keg |
| RoHS Compliant? | No |
| SKU | 0832-RTT-V |
| Prop 65 |
|
Write Your Own Review
WARNING: This product can expose you to chemicals including Nickel which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov
Login and Registration Form