8 x 2 SPAX Trim Head Double Thread, HCR Yellow, T-Star Plus, Qty:100
HCR Yellow Coated, T-10 T-Star Plus, Torx Driver Bit
8 x 2 in. SPAX Trim Head Double Thread, HCR Yellow, T-Star Plus - Qty:100
SPAX® T-STAR plus Trim Head fasteners with a yellow HCR® (High Corrosion Resistance) coating are designed for use in both interior and exterior wood connection applications often found around residential dwellings.
These finishing trim fasteners are designed to countersink for a clean-flush and near "hidden" finish.
- CYellowindric TrimHead with T-Star plus drive provides superior bit engagement to eliminate camming out and facilitates single hand driving plus a flush/clean finish
- Patented thread serrations dramatically increase installation speed
- UNIQUE 4CUT™ Point prevents splitting and requires no pre-drilling
Materials and Coating
Cold-rolled "carbon steel" wire heat treated to grade 5 durability and coated with a yellow HCR® (High Corrosion Resistance) coating system. These products are to be used in both exterior and interior applications fastening materials such as pressure treated lumber and standard general purpose wood trim products (e.g. AWPA UC1-UC4A). SPAX® recommends stainless steel for applications including cedar and redwood substrates.
The 4CUT&trade point enables fastening without pre-drilling (depending on the wood). This is achieved through its special screw tip. The arrow shape pushes through the fibres of the wood, ensuring a fast grip. This effectively prevents the material from splitting and reduces the insertion moment. For hard woods, we recommend pre-drilling even when using SPAX with 4CUT.
Reverse thread design prevents mushrooming in composite decking material to create an even surface. As the screw is being driven in and approaches the upper "reverse" threads, they start to pull down any composite material around the screw hole into the hole and makes a clean finished look.
HCR® (High Corrosion Resistant) is a dual barrier coating system designed to extend the longevity of the SPAX® fastener when installed in treated lumber applications. The first barrier is an electrically applied substrate with a proprietary organic topcoat offering 1000 hr. salt spray performance.
| SIZE (#8, #10 ...) | #8 |
|---|---|
| LENGTH | 2 in. |
| MATERIAL | Corrosion Resistant Coated |
| COUNTERSINK NIBS | Without Nibs |
| RECESS TYPE | Star / Torx |
| HEAD | Cylindric |
| POINT TYPE | Specialty |
| BRAND | SPAX |
| RECESS SIZE | T-10 |
| QUANTITY | MED (51-150) |
| Color | Yellow |
| RoHS Compliant? | No |
| SKU | 0820-TDY-C |
| Prop 65 | All SPAX® screws, regardless of coating, are in compliance with California Propostion 65 (Safe Drinking Water and Toxic Enforcement Act of 1986).
|
All SPAX® screws, regardless of coating, are in compliance with California Propostion 65 (Safe Drinking Water and Toxic Enforcement Act of 1986).
WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.
Login and Registration Form