8 x 1-1/4 in. SPAX Trim Head, Partial Thread, Yellow Zinc, T-Star Plus - 1 Lb.
Qty:100, T-10 T-Star Plus, Torx Driver Bit
8 x 1-1/4 in. SPAX Trim Head, Partial Thread, Yellow Zinc, T-Star Plus - 1 Lb.
SPAX T-STAR plus Trim Head fasteners with yellow HCR® (High Corrosion Resistance) coating are designed for use in both interior and exterior wood connection applications often found around residential dwellings.
These finishing trim fasteners are designed to countersink for a clean-flush, a near hidden finish.
- Cylindric Trim Head with T-Star plus drive provides superior bit engagement to eliminate camming out and facilitates single-hand driving plus a flush/clean finish
- Patented thread serrations dramatically increase installation speed
- UNIQUE 4CUT™ Point prevents splitting and requires no pre-drilling
Materials and Coating
Cold-rolled carbon steel wire heat-treated to grade 5 durability and coated with a yellow HCR (High Corrosion Resistance) coating system. These products are to be used in both exterior and interior applications, fastening materials such as pressure-treated lumber and standard general-purpose wood trim products (e.g. AWPA UC1-UC4A). SPAX recommends stainless steel for applications including cedar and redwood substrates.
The 4CUT&trade point enables fastening without pre-drilling (depending on the wood). This is achieved through its special screw tip. The arrow shape pierces the wood fibers, ensuring a firm grip. This effectively prevents the material from splitting and reduces the insertion moment. For hard woods, we recommend pre-drilling even when using SPAX with 4CUT.
HCR® (High Corrosion Resistant) is a dual barrier coating system designed to extend the longevity of the SPAX® fastener when installed in treated lumber applications. The first barrier is an electrically applied substrate with a proprietary organic topcoat that offers 1000-hour salt-spray performance.
| SIZE (#8, #10 ...) | #8 |
|---|---|
| LENGTH | 1-1/4 in. |
| MATERIAL | Corrosion Resistant Coated |
| COUNTERSINK NIBS | Without Nibs |
| RECESS TYPE | Star / Torx |
| HEAD | Cylindric |
| POINT TYPE | Specialty |
| BRAND | SPAX |
| RECESS SIZE | T-10 |
| QUANTITY | MED (51-150) |
| Color | Yellow |
| RoHS Compliant? | No |
| SKU | 0812-TPY-C |
| Prop 65 | All SPAX® screws, regardless of coating, are in compliance with California Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1986).
|
All SPAX® screws, regardless of coating, are in compliance with California Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1986).
WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.
Login and Registration Form