5 piece Screw Extractor Set, 1/8 in. to 3/4 in.

When you have a screw that the head tore off, all you can do is pull out your handy, dandy screw extractor set.

Drill a hole with the recommended twist drill into the studs center; turn the extractor into the hole counter clockwise
Set includes sizes #1, #2, #3, #4, #5
Precision machined from high quality chrome vanadium steel
heat treated for longer durability.
Manufactured from chrome vanadium steel with square drive ends
Packed in plastic case

INSTRUCTIONS FOR USE:

To extract the broken screw, it is best to start off with a flat surface by sawing or grinding any jagged ends so that a hole is drilled in the centre of the screw, stud or bolt. Drill the hole depth as in the table below.

Extractor #	Screw/Bolt	Drill Size	Minimum Depth
#1	1/8 in. – 1/4 in.	5/64 in.	7/64 in.
#2	1/4 in. – 5/16 in.	7/64 in.	1/8 in.
#3	5/16 in. – 7/16 in.	5/32 in.	13/64 in.
#4	7/16 in. – 9/16 in.	7/32 in.	7/32 in.
#5	9/16 in. – 3/4 in.	9/32 in.	1/4 in.

Insert square end of extractor into tap wrench, turn counter-clockwise while applying a downward pressure. To avoid the risk of breakage it is most important to keep extractor square to the workpiece during this procedure. The extractor should lock into the screw and with more counter-clockwise pressure, remove the broken bolt or screw.