5/16 in. Un-Flanged Alligator Anchors - QTY:100

5/16-in. Un-Flanged Alligator Anchors - QTY: 100

Get dependable holding power with 5/16-in. Un-Flanged Alligator Anchors, designed for secure fastening in concrete, brick, stone, drywall, hollow brick, hollow block, and other building materials. The specially formulated polypropylene anchor body molds into imperfections and undercuts in the drilled hole, helping create a strong mechanical bond between the anchor, screw, and surrounding material.

These versatile wall anchors are especially effective when installation conditions are less than perfect. The anchor helps seal the hole around the screw to reduce moisture entry while providing excellent resistance to vibration and shock. The un-flanged design is ideal for push-through mounting, allowing the anchor to be installed through the material or item being fastened when appropriate.

Reliable Holding Power

• Designed for high-load fastening in concrete, brick, stone, drywall, hollow brick, and hollow block
• Provides strong holding power in solid materials and secure performance when a cavity is encountered
• Polypropylene body flows into imperfections and undercuts in the hole for a secure mechanical hold
• Helps bond the screw to the surrounding material while sealing the hole against moisture
• Accepts a broad range of compatible screw sizes
• Maintains strong holding power even when there are minor variations in screw size or drilled-hole diameter
• Resists vibration and shock for dependable long-term fastening
• Sets instantly after installation
• Screw can be removed and reinserted into the same anchor without losing holding power
• Corrosion-proof when used with stainless steel screws
• Uniquely shaped head helps prevent the anchor from spinning and provides a countersinking effect
• Un-flanged design is suitable for push-through mounting applications
• Package includes 100 anchors

Solid Wall Installation

1. Drill a hole into the wall using a drill bit with the same diameter as the anchor. The hole should be at least twice the length of the anchor.
2. Push the Alligator anchor into the drilled hole and tap it flush with the wall using a hammer.
3. Position the item to be mounted over the anchor, insert the screw, and tighten it flush with the item. A screw gun is recommended for best results.

Hollow Wall Installation

1. Drill a hole using a drill bit with the same diameter as the anchor.
2. Push the anchor into the hole and tap it flush with the wall using a hammer.
3. Position the item over the anchor, insert the screw, and tighten it flush with the mounted item.

Versatile Fastening Solution

5/16-in. Un-Flanged Alligator Anchors are a practical choice for installers, contractors, woodworkers, and DIYers who need reliable wall anchoring across a variety of substrates. Their ability to conform to imperfections in the mounting hole provides dependable performance where conventional plug-style anchors may not provide the same level of holding power.

Note: Not recommended for hollow ceiling applications.