Perfect for workshops, garages, manufacturing facilities, and inside your truck or van. When mounted, these holders are held firmly in place by welded tabs, with 1/4-inch holes for mounting screws (included).
Ceramic (ferrite) magnets are composed of strontium carbonate and iron oxide.
Manufacturing -A powdered mixture of strontium carbonate and iron oxide is injected into a wet or dry press for forming. During this process, a magnetic field is applied in the direction of preferred magnetization to orient the material and increase the magnet's performance potential. This magnet is considered oriented (anisotropic). If not exposed to a magnetic field at the time of formation, it is called non-oriented (isotropic).
After the molding process, the magnetic material is then sintered at about 2,000 degrees. The sintering process is similar to that of kilning ceramic pottery, thus the popular name ceramic magnet.
Lastly, the magnet is finished-ground to size with a diamond-bladed grinding wheel, magnetized, and inspected for shipment.
Visual imperfections such as cracks, porosity, voids, surface finish, etc. (commonly found in sintered ceramic magnets) do not constitute a cause for rejection. Chips are acceptable if no more than 5 percent of the pole surface is removed. Cracks are acceptable, provided they do not extend across more than 50% of the pole surface.
Magnetizing and Handling -Ceramic magnet material is extremely brittle and can chip or break if dropped on a hard surface, or if allowed to "e; jump at"e; an attracting object.
| BRAND | McFeely's |
|---|---|
| LENGTH | 24 in. |
| QUANTITY | (1) Each |
| SKU | MM-7661 |
| SPECS: |
All magnets have general safety rules and safety specifications based on their unique properties. In order to ensure your personal safety and extend the lifetime of your magnets, it is important to understand the recommended handling, storage, and safety guidelines. All Permanent Magnets (Except for Flexible Magnet Material)
Ceramic Magnets
|
| Prop 65 |
|
WARNING: This product can expose you to chemicals such as copper, nickel, lead or chromium which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.
Login and Registration Form