10 x 2-3/4 FastenMaster Deck Screws, Zinc Plated - Gravel Path Color, Trim Head, Square Drive - 3L056

10 x 2-3/4 in. Trapease2 Cap Head Composite, Zinc, Square, Gravel Path - Qty:350

10 x 2-1/2 in. Trapease3 Composite Deck Screws, Cap-Head, Ttap Star (Torx) Drive, Color - Firepit - Qty:350

10 x 2-1/2 in. Trapease3 Cap Head, Composite, TTap, - Firepit - Qty:350

10 x 2-1/2 in. Trapease3 Cap Head, Composite, TTap, - Firepit - Qty:75

$13.45
Availability: In stock
SKU
0925-SFP-G

10 x 2-1/2 in. Trapease3 Cap Head, Composite, TTap, - Firepit - Qty:75

Guaranteed Clean Finished Look in All Three Synthetic Decking Materials (Composite, PVC, and CapStock)

FEATURES:

  • Anti-Fade Head Coating
  • TTAP Recess with TTap Driver for Superior Bit Engagement
  • Spotter Lid - This lid has Built in Installation Guide for uniform fastener placement

Torx® TTAP® Drive System:

Features a stability button at the tip of the Driver Bit which delivers unmatched stick-fit and wobble-free installation. This special drive bit vitually eliminates fastener strip out.

Approved for use with the following brands:

  • AZEK PVC
  • TimberTech
  • Trex Transcend,
  • Trex Enhance
  • Trex Select
  • Fiberon Horizon
  • Fiberon Paramount
  • Deckorators
  • MoistureShield
  • Veranda
  • ChoiceDek
More Information
SIZE (#8, #10 ...)#10
LENGTH2-1/2 in.
MATERIALCorrosion Resistant Coated
COUNTERSINK NIBSWithout Nibs
RECESS TYPETTAP Torx
HEADComposite Cap-Head
POINT TYPESelf Drilling Wood
BRANDTrapEase3
RECESS SIZET-20
QUANTITYMED (51-150)
ColorFire Pit
RoHS Compliant?No
SKU0925-SFP-G
SPECS:

Installation Information

Important Information:

  • Must install two screws per joist
  • Refer to decking manufacturer's installation
 instructions
  • Not for use where de-icing salts will be used, roof decks or with solid wood decking such as mahogany or into metal framing
  • Not for use within 1,000 feet of saltwater. Use stainless steel TrimTop fastener for these applications

Installation Using Spotter Guide

Deck Surface 90° to joist

  1. Position legs of guide to straddle joist
  2. Push guide flat to decking surface
  3. Drive TrapEase 3 screws through hole marked 90°

Deck Surface 45° to joist

  1. Position notch on guide legs to sides of joists
  2. Push guide flat to decking surface
  3. Drive TrapEase 3 screws through hole marked 45°

Note: Spotter Guide legs act as a 3/16" deck board spacer.

Complete installation instructions included in every box.

Prop 65

All SPAX® screws regardless of coating are in compliance with California Propostion 65 (Safe Drinking Water and Toxic Enforcement Act of 1986).
Prop 65 WarningWARNING: Drilling sawing sanding or machining wood products can expose you to wood dust a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.

Write Your Own Review
You're reviewing:10 x 2-1/2 in. Trapease3 Cap Head, Composite, TTap, - Firepit - Qty:75
Your Rating

All SPAX® screws regardless of coating are in compliance with California Propostion 65 (Safe Drinking Water and Toxic Enforcement Act of 1986).
Prop 65 WarningWARNING: Drilling sawing sanding or machining wood products can expose you to wood dust a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.

We found other products you might like!
Contact Us