1/4 x 2 Expansion Pin Anchor
1/4 x 2 Expansion Pin Anchor
Designed to attach to masonry or concrete. Great for light-duty applications such as installing electrical boxes or shelving brackets.
The Hammer-Set Anchor is a mechanical drive anchor consisting of a zinc die-cast expansion body and a zinc-plated steel expander drive pin.
- Fast, easy installation
- Works in concrete, block, and brick
- Install through material to be fastened
- Low profile mushroom head style
- For use in electric boxes, conduit clips, drywall track, and roof flashing
- Not for use in overhead applications
FEATURES:
- Zinc plated steel pin
- Typical Pull Out Strength in cured concrete = 400 lbs. for the 3/16 in. pins and 800 lbs. for the 1/4 in. pins.
INSTALLATION:
- Predrill hole the same diameter as the anchor with carbide tipped masonry drill bit.
- Hole must be 1/2 in. deeper than the anchor's embedment
- Drive-in pin with anchor installed firmly in concrete.
- Do not strike the pin until the anchor is completely seated.
TIP: a deep socket can be used to tap the anchor body into the concrete without striking the pin.
Age and condition of the wall may affect performance.
| SIZE (#8, #10 ...) | 1/4 in. |
|---|---|
| LENGTH | 2 in. |
| MATERIAL | Zinc, Clear |
| RECESS TYPE | No Recess |
| BRAND | McFeely's |
| QUANTITY | Assorted |
| RoHS Compliant? | No |
| SKU | PMA-0420 |
| Prop 65 |
|
WARNING: This product can expose you to chemicals including Titanium dioxide Crystalline silica respirable powder Carbon black respirable powder which are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.
Login and Registration Form