1/2X6 in. Pin Expansion Anchors - Qty:10
1/2X6 in. Pin Expansion Anchors - Qty:10
When the pin is set, the anchor is locked!
Now you can tell instantly whether the anchor that you are depending upon to hold a heavy load has been installed properly - just by looking at the pin. If it's set, the anchor is ready to use.
Better yet, the anchor is set by simply dropping it into an appropriately drilled hole ( depth is not critical) and hammering home the pin. You'll never need to worry again about an anchor failing to seat because the wedge didn't grab, or about unset, unsafe anchors waiting to fail at the worst possible moment. Remember, when the pin is set, the anchor is ready to use. Bag of 10 includes nuts, washers, and pin drive anchors. Drill the hole the same size as your anchor.
Recommended for use in concrete only!
Yellow Zinc plated. Yellow Zinc referrers to the plating process where the color of the chromate that is applied after zinc has been deposited on to the surface of the part. Yellow chromate adds a layer that prevents the zinc from corroding increasing the overall protection of the finish. Yellow Zinc has a rainbow or iridescent appearance with dominant yellow tones.
- Size x Length: 1/2-13 x 6
- Thread Length: 2"
- Maximum Thickness Fastened: 4"
- Minimum Embedment: 1-1/2"
| SIZE (#8, #10 ...) | 1/2 in. |
|---|---|
| LENGTH | 6 in. |
| POINT TYPE | Specialty |
| BRAND | McFeely's |
| QUANTITY | SML (1-50) |
| RoHS Compliant? | No |
| SKU | PDA-0860-D |
| Prop 65 |
Warning: Drilling sawing sanding or machining wood products can expose you to wood dust a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood. |
WARNING: While working in a hazardous areas where you can be exposed to flying objects, fragments, and particles, primary protective devices such as safety glasses or goggles with side shields must be worn. Secondary protective devices such as a face shield is required in conjunction with primary protective devices during severe exposure to impact hazards.
Warning: Drilling sawing sanding or machining wood products can expose you to wood dust a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.
Login and Registration Form