Read our Privacy Policy.
Nothing detracts from a set of cabinets faster than handles that seem to be randomly placed on the doors and drawer fronts. This jig makes it easy to accurately install handles and knobs. Drill bushings adjust independently to fit handle sizes up to 24" between centers. An offset fence allows for spacing from the edge of up to 6", and an edge stop provides for an edge spacing of up to 12". A special 45 degree notch allows for installation on the diagonal as well. 3/16’’ Hardened steel drill bushings. The minimum distance between drill holes is 1-1/4" and the maximum is 14-9/16". Made of virtually indestructible polycarbonate plastic (like jet aircraft canopies!). Made in USA.
REVIEW SNAPSHOT®
(based on 6 reviews)
100%
of respondents would recommend this to a friend.
Pros
Cons
Best Uses
REVIEWS
Reviewed by 6 customers
Sort by
Displaying reviews 1-5
Back to top
Previous | Next »
(1 of 1 customers found this review helpful)
Great tool for those long handles
By Onlymintstuff
from Chicago, Illinois
About Me Avid Do-It-Yourselfer
Comments about Euro Handle Drilling Jig:
Overall I liked this tool. I had 60 long style handles to install and I did not want to risk messing up the cabinet doors with a missed measurement. What I found with this tool is that you had to be very careful as it tends to want to move while you're marking the holes. This is partially due to the nature of the long handles but also because you have a single point of contact at one end and a shorter portion trying to hold square. I double checked every mark with my 12" adjustable square before I drilled so I was able to catch it each time it moved. I would have had a hard time making a template for this many handles so the tool was a big time saver. I did not use this tool on the drawer fronts rather used the Woodhaven product. I would recommend that this tool be modified to accept a punch type marker.
Worked great
By Bill
from Vallejo, CA
This is a great tool for installing cabinet pulls and it saved a lot of time.
This is a very usefull jig fast and easy
By Birdman
from Essex Iowa
I have been building custom cabinets for fourty years and tried to make different home made jigs but this jig is so easy to use and saves alot of time.
great product
By happy
from nebraska
Bought this for my husband. He thinks it's great. [...]
(2 of 2 customers found this review helpful)
Euro Handle Drilling Jig
By kite flyer
from Naples, Fl.
If you have a lot of handles to install on cabinets, you need this jig. Set it up right and all the holes for the handles will be in the same location everytime. It really saves a lot of time. It works best to test the location for the handle on scrap wood first. Once you are happy with the setup, you can drill on the cabinets. It works well but on a 36" drawer you have to mark the middle of the drawer and set the jig to that mark. You cannot use the stops to position it from side to side as the jig needs to be longer. You still get the proper depth from the top. It was a very good investment if you are doing an entire kitchen and bathrooms.