FastCap Crown Clips Hang Crown Molding without a Helper!
Now you can install crown moldings without the need for an army of helpers. FastCap’s new Crown Clips are lightly fastenedto the wall using drywall screws with the hook positioned slightly lower than the installed bottom edge of the molding. The crown molding is then laid in the hook and supported while the molding is nailed. The clip is removed before the molding is nailed by simply sliding it to the left about 3/4” and popping it over the screw head. Crown Clips are completely reusable. Hangers are approximately 3-1/2” tall and 1-1/4” wide, with a 9/16” deep hook. Hangers may be located up to 48” apart, but plan on using one hanger for every 36” of length. Made in China.