Kreg® Automaxx™ Right Angle Pocket Hole Clamp
The Secret Weapon for Pocket-Hole Construction!
This clamp makes projects with 90° joints faster and easier by giving you the helping hand you need to hold the parts in position as you drive the screws. Just slip the pin on the Right Angle Clamp into a pocket hole, close the clamp, and it draws the mating pieces tightly together. The swiveling clamp pad opposite the pin grabs the mating pieces securely.
Thanks to AutoMaxx® Auto-Adjust Technology, the Right Angle Clamp adjusts to match the material automatically with a simple squeeze of the handles!
- Clamp using the Pocket-Hole - The steel pin on one arm of the clamp is shaped to fit snuggly into a pocket hole, securely anchoring one workpiece against the other for easy assembly. Just drive a screw in an adjacent pocket hole while the Right Angle Clamp holds the pieces for you.
- Swivel Pad - On the arm of the opposite pin, this clamp features a pad capable of swiveling to adjust to the dimensions of your material, so you can count on solid clamping without the chance of joint shifting.
- Ultra Wide Reach - Whether you're joining two thin drawer sides or thicker materials to frame an outdoor project, the Right Angle Clamp opens wide to get the job done.
- Use Two Clamps - Many woodworkers find it handy to use two Right Angle Clamps when assembling large workpieces. Place a clmap on each end to hold the parts while you drive screws in the remaining pocket holes.
Kreg® Part #: KHCRA
Documentation is unavailable