FAMOWOOD Latex Wood Filler - Birch - Quarter Pint

FAMOWOOD Latex Wood Filler - Birch - Quarter Pint

FAMOWOOD Latex Wood Filler has the same outstanding qualities of Original FAMOWOOD, but has very low odor and can be cleaned up with water!

• Dries in 30 minutes
• Won't crack or shrink
• Can be sanded, drilled or planed
• Stainable and paintable
• Interior/exterior use
• Solvent free – low odor and easy water cleanup

Instructions for Safe Use

Follow these step-by-step directions when using FAMOWOOD Latex Wood Filler:

1. For best adhesion, cracks or defects should be clean and dry.
2. Press firmly into defect by hand or putty knife.
3. A thin film will dry within minutes. Lower temperatures require longer drying periods.
4. When dry, sand flush with surrounding surfaces.
5. Surfaces may be painted, varnished, lacquered, waxed, or shellacked, after FAMOWOOD application.
6. FAMOWOOD can be drilled, nailed, planed, or sawed like ordinary wood.
7. Clean tools, while still wet, with water or soap and water. If product has dried on tools, use chlorinated solvent or steam.
8. Close container after each use.

WARNING: This product can expose you to chemicals including wood dust which is known to the State of California to cause cancer. For more information go to www.p65warnings.ca.gov.

WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.