CrystaLac® Sanding Sealer Seals wood grain fibers for easy sanding and enhances and warms the look of natural wood. Fast Drying undercoat. CrystaLac Sanding Sealer can also be used as a pre-stain conditioner. Apply 1 coat of Sanding Sealer to bare wood and allow to dry. Sand back down to bare wood leaving the sealer only in the wood grain and pores. Apply stain and allow it to thoroughly dry. Oil based stains can take up to a week to dry. Apply another 1 to 2 coats of Sanding Sealer over the dried stain. This will help to seal the stain color down and keep it from spreading. It is now ready for a clear top coat.
|Product Group||Finishing Products|
|Category||Thinners & Solvents|
|Prop 65||CrystaLac Company has chosen to provide a warning based on its knowledge about the presence of one or more listed chemicals without attempting to evaluate the level of exposure. Products marketed or sold by CrystaLac Company may contain listed chemicals at levels that are below the Proposition 65 level of concern, or could even be zero. However, out of an abundance of caution, CrystaLac Company has elected to place the Proposition 65 warning notification on all its products. Listed Chemicals Present or Potentially Present in CrystaLac Company Products –