CrystaLac Polyoxide Wood Floor Finish - Semi-Gloss - 1 Quart

CrystaLac Polyoxide Wood Floor Finish - Semi-Gloss - 1 Quart

CrystaLac Polyoxide Top-Coat for Wood Floors - Gallon

CrystaLac Polyoxide Wood Floor Finish - Gloss Finish - 1 Gallon

CrystaLac Polyoxide Wood Floor Finish - Gloss Finish - 1 Quart

$30.99
Availability: In stock
SKU
CLP-3901


CrystaLac® Polyoxide Wood Floor Finish is a Gymnasium Tough, Heavy Duty, Non–Yellowing, Scuff Resistant, Water Based Polyurethane that is U.V. Stabilized and Fortified with Aluminum Oxide for Exceptional Durability.

CrystaLac® Polyoxide Wood Floor Finish is an amazing, easy to use, water based polyurethane finish. It can be brushed, sprayed, or mopped on with a lamb's wool applicator. The finish dries to the touch within an hour and additional coats can be applied every two hours. A flooring project can be completed with four to five coats applied in only one days' time!

Another advantage of using Polyoxide Wood Floor Finish is that there is virtually no smell. This is a great benefit when doing home projects. Traditional polyurethane wood floor finish can leave harmful, lingering odors for weeks.

Polyoxide is made with rubber tough, self– curing, waterborne polyurethane resins. It is fortified with Aluminum Oxide and U.V. stabilizers for years of floor protection and beautification. It has no harsh odors.

Polyoxide can be applied over any clean, sanded surface, and is compatible with thoroughly dried oil or water-based stain. Polyoxide dries to touch in 30 minutes and cures hard in 24 hours. Covers 400 sq. ft. per Gal.

Stir contents gently but thoroughly. Do Not Shake. Apply 4 or more coats allowing 2 hours of drying time between coats. Lightly scuff sand after first coat to remove any raised grain or fibers. Additional sanding between coats is not necessary. Do Not Use stearate sandpaper or tack cloths. Rinse applicators with warm soapy water. Any leftover Polyoxide can be stored in a clean, air–tight container for future use.

Properties of Polyoxide :

  • Fast Drying
  • Water Clean–Up
  • U.V. Stabilized
  • Scuff Resistant
  • Non–Yellowing
  • Non–Flammable
  • Non–Toxic
  • Low V.O.C.
  • No Lingering Paint Smell

  • Product Details: Polyoxide Wood Floor Finish
  • Sheen: Gloss
  • Application Tool: Foam Brush, Lamb’s Wool, wipe on, or Spray
  • Location: Interior wood surfaces
  • Recoat: After 2 hours
  • Dry Time: 35 min to 1 hour
  • Cleanup: Water
  • Coverage: 120–150 sq. ft. per quart
  • Coats: 3 to 5 coats are recommended.
  • Recommended Uses: Floors, furniture, woodwork, doors, cabinets, accessories
More Information
BRANDCrystaLac
ColorClear - Gloss
QUANTITYQuart
SKUCLP-3901
SPECS:
  • Product Details: PolyOxide
  • Sheen: Gloss
  • Application Tool: Bristle brush, Foam Brush, Lamb’s Wool, wipe on or Spray
  • Location: Interior wood surfaces
  • Recoat: After 2 hours
  • Dry Time: 35 min to 1 hour
  • Cleanup: Water
  • Coverage: 120–150 sq. ft. per quart
  • Coats: 3 to 5 coats are recommended.
  • Recommended Uses: Floors, furniture, woodwork, doors, cabinets, accessories
Prop 65

Prop 65 WarningCrystaLac Company has chosen to provide a warning based on its knowledge about the presence of one or more listed chemicals without attempting to evaluate the level of exposure. Products marketed or sold by CrystaLac Company may contain listed chemicals at levels that are below the Proposition 65 level of concern or could even be zero. However out of an abundance of caution CrystaLac Company has elected to place the Proposition 65 warning notification on all its products. Listed Chemicals Present or Potentially Present in CrystaLac Company Products –

  • N-Methylprrolodone
  • Silica Crystaline
  • Carbon Black
  • Titanium Dioxide
For more information go to www.P65Warnings.ca.gov.

Prop 65 WarningCrystaLac Company has chosen to provide a warning based on its knowledge about the presence of one or more listed chemicals without attempting to evaluate the level of exposure. Products marketed or sold by CrystaLac Company may contain listed chemicals at levels that are below the Proposition 65 level of concern or could even be zero. However out of an abundance of caution CrystaLac Company has elected to place the Proposition 65 warning notification on all its products. Listed Chemicals Present or Potentially Present in CrystaLac Company Products –

  • N-Methylprrolodone
  • Silica Crystaline
  • Carbon Black
  • Titanium Dioxide
For more information go to www.P65Warnings.ca.gov.