These new super duty bits represent the finest in the extensive line of CMT flush trim bits with ball bearing guides. A negative shear angle cutting edge and 19mm cutting diameter set CMT flush trim bits apart from standard bits. Work quickly and safely to get superior finishing with absolute minimal chipping.
The innovative two–flute router bits are equipped with a double bearing and feature a down shear design allowing cleaner, smoother cuts on a variety of materials.
Now its no longer necessary to flip or move your tool during routing operations. This tool is particularly effective when routing curved elements along or against the grain.
Safety tips: dust and chips from laminate materials are hazardous to your health and safety. Always wear a dust mask and eye protection when routing.
Shop tips: these bits are excellent for making through mortise. Use a straight bit to groove the area to make the through mortise. With a drill bit bore a hole through the wood at one end of the groove. Turn the workpiece over to finish the mortise. Use a flush trim bit with a cutting length slightly longer than the fillet, following the groove made on the opposite side of the workpiece with the ball bearing guide.
Safety precautions: never use damaged or worn bits. Always work at the recommended proper feed rate without forcing the bit. Pay particular attention when making the initial cut with a small diameter bit. For best results when working with small diameter bits, make the cut in more than one pass.
|Product Group||Bits Blades & Abrasives|
|OVERALL DIAMETER||3/4 in.|
|CUTTER HEIGHT||1 in.|
|NUMBER OF CUTTERS||N/A|
|OVERALL LENGTH d||No|
|SHANK SIZE||1/2 in.|